【 Analysis & Review 】 Chinese stationary or static heating 12v 2020
Stationary heating
There is very little information about this type of heating, which are gradually becoming popular due to their low price. To this day it has almost been 3 I have had this Chinese heating installed in my home for years to heat the dining room with an average of about 10/12 hours a day.
During all this time, I have messed around, disassembled, I have tried, I have investigated and little by little I have been making manuals and DIYs that you can consult in the menu at the top.
But all this doesn't end here, I'm working on several more bricos, one for heat the water in the tank of the vehicle, and another to be able to control the heater via Wi-Fi or Bluetooth with mobile devices and smartphones..
I hope that with all the information that I am putting on the website it helps you decide to buy this low-cost heating that has nothing to envy of the original ones like webasto, eberspacher o planar.
Here you have some photos so you can see it in detail., comment that they are ALL exactly the same, There is no one that works better than another, they just change the number of accessories they come with., the type of screen and the color of the case.
⇒ Available models and technical characteristics
| Models | 2Q/Q3 | 5Q/Q8 |
|---|---|---|
| Measurements | 310x115x122 | 376x140x150 |
| Maximum power | 2000w | 5000w |
| Electrical consumption | 7w a 37w | 7w a 45w |
| Diesel consumption | 0.10 a 0.36l/h | 0.10 a 0.73l/h |
exist 4 versions, of which 2kw, 3kw have the same size so through configuration you can give it more or less power according to your needs. The same happens with the 5kw versions., and 8kw are the same with two different names.
Don't be fooled into thinking that one will be more powerful than the other because that is not the case..
Comment also, It is common practice to send the 5kw model and sell it to you as a 2kw one., You have to look very carefully at the technical data sheet or else you will find yourself in the situation where you will have too powerful heating in your vehicle., and believe me, you will be hot (although there is a solution) as you can see in the manuals.
⇒ Chinese stationary heating measurements 2kw vs 5kw
Difference in measurements and size of heaters
⇒ What does the installation KIT include??
Depending on the seller we buy it from, May include more or fewer accessories for installation, some sellers may not include the exhaust muffler (chrome), and only the admission (black piece), but that is not a problem since it can be purchased separately here, and not mounting it will not influence its operation.
This is a list of what is “usually” include.
- aluminum intake pipe
- INOX exhaust pipe
- Muffler or intake filter (hay 2 versions)
- exhaust muffler
- Screws
- Clamps of various sizes
- rubber tube / rubber to connect the heater unions to the pump
- Nylon tube that goes from the diesel tank to the pump
- diesel filter
- Wiring with its crimped connectors, ready to connect
- Control command, Analog or roulette, digital, o LCD (there are several versions)
- Plate / metal mounting bracket
- Auxiliary diesel tank 5 o 10 liters according to the seller
⇒ Types of command / screen
There are countless control models, There are analog or roulette ones like a thermostat, digital, and with LCD screen.
From experience I always recommend the LCD screen. with it you can configure the heating, purgarla, see errors, adjust power, and countless things, What you can't do with the roulette controller.
⇒ New command 2020
This new remote has the functions that the others, and incorporates a new novelty, and the screen turns off when you don't touch it. Something very appreciated by many people, which does nothing but ask me how to turn off the screen.
Now on SALE with Black Friday, only €103 with the discount coupon code: friday10
And this model allows it as standard without having to make inventions., nor print custom covers with a 3D printer.
⇒ Analog Control
Analog control knob
It is the most basic version which I do not recommend, does not allow you to adjust the parameters to set the height settings, so it will surely fail from 1700/2000 metros.
I have received many messages saying that they chose this model because it is less likely to break down., Don't make that mistake and buy the LCD version.
⇒ Digital Control
Chinese static heating digital control
This is an improved version, to analog, allows more adjustments, but it's not intuitive.
⇒ Black LCD control
Chinese static heating LCD control knob
This version, For me it is the best option of all, it allows you to do the following:
- Heating control by power
- Heating control via temperature (thermostat mode)
- View heating faults
- See room temperature
- View battery voltage
- See heating faults
- Fuel pump speed setting
- Setting the maximum and minimum fan speed
- Schedule on and off time
- Set shutdown time
- Remote start with remote control
This version has 2 power on timers and 2 off, works like a cell phone alarm, It is very easy to program.
Allows you to use this remote control (ONLY THIS).
⇒ Blue LCD Control, red and gold
This type of LCD is an improved version, It is available in various colors, and you can change the layout of the buttons.
It's prettier in my point of view., has some improvements, but also drawbacks compared to its black version.
It incorporates a height sensor, so you can see on the screen the height at which you are, This does not mean that you change the heating settings to adjust to the height you are at., because I have been able to verify that this is not the case.
The ignition programming system is very different, in this version it is a timer, For example, you can tell it to turn on 5 hours, and turn it off 8. And you can only program one on and one off., and not two like in the black version.
This screen works with a new remote control, It is much more complete, you can change the operating mode and temperature, showing it on the screen at all times.
red knob stationary heating china
⇒ 12v and 24v version
The LCD models allow you to easily change the spark plug and the engine from 24v to 12v or vice versa..
Unfortunately, as the screen is a universal accessory for both voltages, we can find that when connecting it, It is configured at 24v and when using it at 12v we give the error E-01 What does low voltage mean?, and go crazy thinking that the battery is in bad condition.
Heating models without LCD display cannot be adjusted to change the voltage., so the screen would also have to be changed. If this is your case, in our section spare parts and accessories you can find it.
⇒ Need height kit like webasto, eberspacher o planar?
If you have or have had a webasto stationary heater, eberspacher o planar, you will know that these require a HEIGHT Kit to be able to operate at heights higher than 1700 at 2000m and up, because they cause smoke problems and end up going out.
These height kits are expensive, They can cost between 150 and €200 depending on the brand, and without counting the labor.
With Chinese stationary heaters, It is problem this resolved, it is easy to adjust them, being totally free its adaptation, It will only require a small adjustment to be able to function at any height, here do you have the manual for it, yes indeed, you must have the LCD screen.
⇒ Models with analogue control operate at height?
And, but sooner or later they will end up failing like the webasto ones. Over time (hours) will create carbon, and it will clog causing it to stop working. So we recommend you put an LCD screen.
If due to ignorance you bought the heating without this type of control, you can replace it without problems. You have it available in our section accessories and spare parts.
⇒ The most feared, the spare parts
Surely you have read in forums and Internet groups that since they are Chinese they do not have any type of technical support nor will you be able to find accessories or spare parts to be able to fix it when it breaks..
This is totally false, You have them everywhere and they are very cheap.. As we have mentioned before, you have them all compiled in our section. spare parts.
⇒ Technical support
From on our website, and our group of facebook We offer totally free technical assistance. You just have to go to the bottom of this same post or any manual and see for yourself..
We DO NOT charge for advising you and helping you with your heating or any other issue., therefore we beg you, Please do not block advertising on our website, With this you help us maintain the server, and to offer you our services totally free.
Little by little the community that we have created on Facebook is growing, myself with nick “ES TEBAN” I try to answer all the questions that are asked., there you can find photos of montages, in different types of vehicles. And all kinds of questions and advice, both mine and the rest of the users, I encourage you to join.
|
|||||||
⇒ Bricos Tricks and Errors of Chinese stationary heating
This heating is fully customizable, any failure that may give you, or problem has an easy solution, and if your problem does not appear in any of our tutorials, Write to us and we will study it to give you the solution.
- Manual, height kit activation and configuration
- Error and troubleshooting manual for Chinese stationary heating
- Manual to lower the power.
- FAQ with frequently asked questions
- LCD Screen Manual
⇒ It is easy to assemble?
years ago, They sold Webasto and Eberspacher with very extensive manuals, cables without connectors that you had to crimp, you could make mistakes, bad connections etc, and by then its assembly was quite complicated.
With the arrival of the chinese heaters this has been resolved, They come with their respective connectors perfectly crimped, cables taped to the ends, and long to facilitate assembly without problems.
They come ready to plug and play, The truth is that I was surprised when I opened the box., came a bunch of cables, con 3 connectors, one for heating, one for the fuel pump, and another for the control knob (thermostat) and then two loose cables, one black for negative and one red for positive.
Electrical installation couldn't be simpler, just try not to lengthen the power cord, and if you have to do it, cut it and use one with a larger section so that it doesn't cause problems..
The assembly part itself, All you have to do is make some holes with a hole saw to remove the intake and exhaust pipes., and connect the connection to the auxiliary tank included in the kit, or modify the original installation of the vehicle or put espadin. The latter is already more complicated., I recommend using the included deposit or, failing that, sprat, although it is more complicated than putting a T.
⇒ Quality control
Despite what you may have read on social media, that they are very bad, They fail more than a fair shotgun, they put smoke inside the vehicle, I can tell you that it is TOTALLY FALSE.
With the arrival of these heaters, many sellers have seen their sales reduced considerably, which I understand perfectly. That's why they criticize them and spread false rumors to scare people and give them a bad name..
Proof of it, is that the webasto and eberspacher accessories are exactly the same as those for Chinese heaters, and the users of our Facebook group with more than 1300 users can confirm it.
As with everything, some unit may arrive damaged, or with a defective part. But talking to the seller, without any problem he will resend you the defective part, or return part of the money you paid to buy it yourself.
⇒ You have questions about assembly or operation?
Enter our frequently asked questions section, where we will solve all your doubts by clicking Here.
⇒ Manual LCD display Chinese stationary heating / NOVELTY
Credit Here to access the manual.
- Very economical price
- Easy installation
- Normally without customs
- 2 years warranty (and Amazon) 6 months (on ebay or aliexpress)
- With internal overtemperature sensors
- Combustion failure detector
- Replacement parts available at very low prices
- Difficulty in homologating them, due to lack of documentation.
After trying it, see how it works, heating power, low cost accessories and spare parts, very extensive unofficial technical service from me, and best of all its price, taking into account that a top brand heating such as webasto, eberspacher or planar cost around €900 without a doubt my recommendation is to buy it.
It will give you the same service as any other, but for a quarter of the price. And in case it breaks down, With what you have saved you can buy yourself 3 but.
My recommendation is that you buy the model with a Black LCD screen 2kw, 5kw. Although if you are not going to use the timer you might be more interested in the model with Blue LCD 2kw, 5kw.
If you don't know what power you need, It is very simple if your vehicle is a VW T4 type., t6, vivaro (inferior a L2H2, you need the 2kw version. On the other hand, if your vehicle is type LT35, Sprinter, Crafter, Movano (L2H2 or higher) you need the 5kw version.
Very good, In the end I didn't buy it because I preferred not to rush and measure carefully where I was going to place it., ya que no me cabe en ningún cajón y tengo que adaptarle un espacio.
Al final he decidido comprarla pero antes me surgen dudas que ojalá me puedas contestar.
He pensado comprar la que esta en Madrid porque la otra que viene de china, en los comentarios pone que llego defectuosa y me gustaría que llegara antes del día 20 a poder ser.
Pero mirando una y otra, la primera la que viene de Madrid que tiene mando que no es regulable no parece que traiga la salida de escape, en cambio la otra si. Llevan las dos la salida de escape?
Crees que merece esperar unos días más por la que tiene mando regulable, al final además hoy sale mejor la del mando regulable.
Por otro lado si no me convenciera o llegara defectuosa podría devolverla.
You can pay with PayPal at alliexpres.
I have never bought through there and it gives me a bit of a shock.
Thank you so much!!!
Hi Rakel..
If you want it before the day 20 you have to buy it in madrid, the other one is not going to arrive on time. The one of madrid It does not come with the silencer but you can order it separately for less than 7€ here and you will put it on when it arrives. The heating can operate without the.
If you weren't in a hurry, I would definitely take him adjustable knob, I recently discovered that the Blue LCD screen incorporates an altimeter, so in principle it adjusts itself for height.
Both sellers accept Paypal., so apart from the aliexpress Guarantee you have the 6 months of paypal, what if it works wrong, If it breaks or you want to return it, they even reimburse you for the return costs.. Que no te de cosa comprar en aliexpress! tienes doble protección al pagar por Paypal, y siempre responden ante cualquier problema. Si tienes algún problema me escribes y te ayudo a reclamar o lo que haga falta.
Si quieres únete a este grupo de Facebook sobre estas calefacciones, ante cualquier duda, escribe y te responden rápido. Greetings.
Hola, mi pregunta es primero sobre el ruido q producen ambas, la portátil y la otra, la portátil supongo q sea más fácil de instalar, pero puede ser que haga más ruido?, sería para instalación en una T5, también si hay que instalar una batería auxiliar para conectarla o serviría con la que ya trae, también el consumo de gasoil que tiene, gracias
Hi David.
Respecto al ruido no hay diferencia, lo que es la unidad calefactora es la misma en los 2 casos. La batería seria aconsejable utilizar una auxiliar, de lo contrario podrías encontrarte por la mañana con que el vehículo no arranca.
Y sobre el consumo, depende mucho de la potencia a la que la utilices, y del tipo de aislamiento que tengas en la T5, pero un consumo aproximado seria entre 1 y 1,5 liters.
Greetings.
hello, compre una estacionaria de 5w y al principio me dejaba un mensaje de error de insuficiencia de voltaje. resulta que venia configurada de fabrica a 24v. consegui modificarlo a 12 v pero, ahora me suelta el error 03. este error hace referencia al sistema ignicion, it does not work. he sacado la bujia y he comprobado que se enciende antes de saltar el error 03.
asi que no se donde puede estar el problema.aguna sugerencia?
Hola Curro, me han escrito ya varios a los que les ha venido configurada a 24v, pero es fácil cambiarlo.
Como as probado la bujía, a través del conector que va a la placa de la centralita, o los bornes de la bujía? podría ser que el cable estuviera mal.
El siguiente paso seria cambiar la centralita, ya que no tiene mucho mas misterio, cuesta unos 15€, si escribes al vendedor te la mandara gratis, dudo mucho que te ponga problemas.
Prueba el cable y me comentas.
Greetings.
Hola de nuevo, parece ser que ya se cual es el problema. Parece que la calefacción trabaja a 24v en vez de a 12v. En la bomba pone 24v, en el motor del ventilador tb y supongo que la bujia será para 24v. He mirado los omios de la bujia y me da 1,4. Creo que si fuera de 12v tendría que darme un valor de 0.7,es así?
Si ese es el problema y por la bujia me da el error 3. Con cambiarla y poner una de 12v basta? O tengo que cambiar tb la bomba y el motor del ventilador?
Gracias por la respuesta Esteban. Efectivamente, la bomba funciona a 12 y en realidad el ventilador también gira pero, ¿entonces también tengo que cambiarlo?
Pero la cosa es, gira a las mismas revoluciones que el de 12v? Si no lo hace cuando pongas el resto de componentes igual no funciona y tienes que esperar otro mes a que llegue el motor. Sube un video con el motor funcionando a tope al grupo de Facebook a ver si +- puedo compararlo con el mio.
Greetings
Hola Curro, si te ha enviado la versión de 24v, como comentabas la bujia de 12v son 0.42Ohms / 0.70Ohms and the 24v ranges between 1.2Ohms and 2.0Ohms. You will have to change the spark plug, y motor, the diesel pump does work at 12v, You can check it yourself by connecting it to a direct 12v battery.
Greetings
Hola,After many fights with the seller they returned me 45 euros instead of sending me the plate… In the end I bought it but you can see that it is a different model because the connections that go to the connector are in a different order and it has one extra connection that I think is to attach the wheel adjuster that some models come with..
The positive and negative are in the same position but, one of the two that has the diesel pump has been changed and two that go to the panel also have another position…
I asked the board seller about the connections but he didn't respond.
Do you know how I can find out how the connections are going??
Hello job, enter the group of facebook and upload photos of the 2 centralitas (one next to the other) and the connectors, Let's see if we can figure out how to do it.. Without seeing it I wouldn't know how to tell you.
Greetings.
Thanks for responding so quickly!
To see if the spark plug worked, I took it out from where it is screwed in and without disconnecting it from the plate, I turned on the heating.. Shortly it began to glow at the tip and the error occurred. 03.
So you think the fault could be in the control unit?? Could be digital panel failure?
I don't think it's a screen thing., What this does is show errors, turn it on, turn it off, etc.. the faults come from the control unit. Talk to the seller, dile que te da el error E-03, que es de la bujía, que la has probado y se enciende, pero que siempre da ese error. Si es medianamente listo en vez de consultar al fabricante te enviara directamente la centralita.
Hola,
Tengo una Traffic corta y estaba pensando en pillarme una calefacción de 2 Kw, pero no encuentro ninguna que traiga el mando LCD azul (el que viene con altímetro) con el mando a distancia. Mis dudas:
– Será suficiente los 2 Kw o pillo la de 3 Kw?
– He pensado en pillarme la calefacción con mando analógico y luego comprar el LCD azul, pero en el enlace que hay en la web no viene con mando. Hay alguna con el LCD azul y mando?
Thank you so much
Hola Ismael, he estado buscando y te he encontrado la de 2kw, con el mando azul, y con el control remoto rojo bidireccional, ayer la estuve buscando y no habia ninguna (In Spain) has tenido suerte porque ademas esta aqui y con entrega en 2/3 dias. It is is the link
Hay una cosa que muy poca gente sabe, la de 2 y 3kw son las mismas, igual pasa con las de 5 y 8kw, son solo dos modelos (por medidas) y mediante la configuración se aumenta la potencia. Cuando la tengas y la pruebes, si necesitas aumentarlo, escríbeme y te paso los parámetros.
Greetings.
Comprada!!!
Ahora a la espera (corta) y a liarme a instalarla. Muchas gracias por la rapidez en contestar, así da gusto.
Greetings.
Únete si quieres al grupo de facebook, así puedes coger ideas para el montaje, o por si tienes alguna duda o algo.
Greetings!
hola buenos días,tengo una vw california t4 y ayer estuve desmontando el cajón donde va alojada la calefacción eberspacher,por que no me funcionaba,estoy haciendo varias comprobaciones para volver a ponerla en funcionamiento pero despues de 25 años que tiene estoy pensando en instalarle una nueva.Me podrías decir si podria instalar esta dentro del cajon de la antigua?
Muchas gracias por el articulo y la informacion
Hola, and, no abría ningún problema, have this de oferta con el mando azul, que tiene el sensor de altura y mando a distancia.
Te aconsejo la de ebay, te llegara en 24/48h.
Greetings
Hola yo tengo una de las que ya viene todo montado en su caja metalica.
Trae un lcd mas moderno que su anterior version ( el que es negro rectangular que sale en todos los videos).El que me trae a mi se puede emparejar cln un mando a distancia rojo(el cual no me mandaron)y lo intente con el del lcd anterior pero no es posible.la duda es si puedo cambiar el lcd moderno por el anterior ya que traen conectores diferentes.El que tengo yo son tres clavijas en un conector redondo y el lcd anterior son 3 clavijas en un conector triangular.
Se podria cambiar? Seria complicado?
Hola Pablo, los mandos son compatibles, la unica diferencia es el conector, yo te aconsejaria que mantuvieras el LCD azul, ya que es mas moderno y incluye un sensor de altura. Pero si quieres cambiarla por el otro solo tendrias que cambiar el conector, lo suyo seria cambiarselo al mando negro por si quisieras volver atras, te he buscado el conector redondo creo que es este, por las fotos parece la misma rosca, pero no estoy 100% seguro hasta probarlo.
Tienes la otra opcion que es cambiar el redondo por el triangular, que este si se encuentra lo tienes here.
Es una pena, pero el mando rojo no esta disponible para comprarlo suelto. Si estaba anunciado en el anuncio de la calefaccion la mejor opcion seria reclamarselo.
Si cambias los conectores, recuerda respetar los colores de los cables para que coincidan, son uno negro, rojo y azul, de lo contrario podrias estropear la pantalla o centralita.
Greetings.
tenia un mando mas sencillo compre el lcd pero no funciona pone e 07 o e 00 depende
Hola el error e-07 es por falta de comunicacion de la lcd con la centralita de la calefaccion. Entra bien el conector? el problema esta en el cable azul, no hace buen contacto o el cable esta mal, revisalo a ver que este bien metido dentro del conector.
Si no consigues que funcione, enviale un mensaje al vendedor, y no creo que te ponga problemas en enviarte una nueva.
Greetings
con el mando antiguo funciona perfecta
Good morning.
Al final no pude comprarlo antes.
De ante mano mil gracias por todos tus maravillosos consejos.
Ya iba a comprarlo y he encontrado esta oferta:
http://s.click.aliexpress.com/e/cGsS4Ny8
Me gustaria que le echaras un vistazo, a ver si todo está correcto.
Porque la diferencia de precio es considerable.
Y he pensado después comprar el silenciador al enlace que me posteaste http://s.click.aliexpress.com/e/bMg6YI7e
Faltaría algo más?
Cuéntame por favor que opinas y dependiendo de eso compro esta o la de el mando con control remoto que ahora esta con PayPal a 188 euros.
Mil gracias A.!
http://s.click.aliexpress.com/e/btnXOb3S
Perdón quería decir este enlace que me parece que trae más cosas, llega antes y además ya han vendido alguno.
Me da más confianza.
Miralo por fa a ver que te parece.
Mil gracias de nuevo!