Best price

【 Analysis & Review 】 Chinese stationary or static heating 12v 2020

Stationary heating

There is very little information about this type of heating, which are gradually becoming popular due to their low price. To this day it has almost been 3 I have had this Chinese heating installed in my home for years to heat the dining room with an average of about 10/12 hours a day.

During all this time, I have messed around, disassembled, I have tried, I have investigated and little by little I have been making manuals and DIYs that you can consult in the menu at the top.

But all this doesn't end here, I'm working on several more bricos, one for heat the water in the tank of the vehicle, and another to be able to control the heater via Wi-Fi or Bluetooth with mobile devices and smartphones..

I hope that with all the information that I am putting on the website it helps you decide to buy this low-cost heating that has nothing to envy of the original ones like webasto, eberspacher o planar.

First of all, tell you that I am delighted with it, heats up a lot, and it is very easy to assemble and operate.

Here you have some photos so you can see it in detail., comment that they are ALL exactly the same, There is no one that works better than another, they just change the number of accessories they come with., the type of screen and the color of the case.

⇒ Available models and technical characteristics

Models2Q/Q35Q/Q8
Measurements310x115x122376x140x150
Maximum power 2000w5000w
Electrical consumption7w a 37w7w a 45w
Diesel consumption0.10 a 0.36l/h0.10 a 0.73l/h

exist 4 versions, of which 2kw, 3kw have the same size so through configuration you can give it more or less power according to your needs. The same happens with the 5kw versions., and 8kw are the same with two different names.

Don't be fooled into thinking that one will be more powerful than the other because that is not the case..

Comment also, It is common practice to send the 5kw model and sell it to you as a 2kw one., You have to look very carefully at the technical data sheet or else you will find yourself in the situation where you will have too powerful heating in your vehicle., and believe me, you will be hot (although there is a solution) as you can see in the manuals.

⇒ Chinese stationary heating measurements 2kw vs 5kw

medidas calefaccion estacionaria china size 2kw 5kw diferencias

Difference in measurements and size of heaters


⇒ What does the installation KIT include??

Depending on the seller we buy it from, May include more or fewer accessories for installation, some sellers may not include the exhaust muffler (chrome), and only the admission (black piece), but that is not a problem since it can be purchased separately here, and not mounting it will not influence its operation.

This is a list of what is “usually” include.

  • aluminum intake pipe
  • INOX exhaust pipe
  • Muffler or intake filter (hay 2 versions)
  • exhaust muffler
  • Screws
  • Clamps of various sizes
  • rubber tube / rubber to connect the heater unions to the pump
  • Nylon tube that goes from the diesel tank to the pump
  • diesel filter
  • Wiring with its crimped connectors, ready to connect
  • Control command, Analog or roulette, digital, o LCD (there are several versions)
  • Plate / metal mounting bracket
  • Auxiliary diesel tank 5 o 10 liters according to the seller

⇒ Types of command / screen

There are countless control models, There are analog or roulette ones like a thermostat, digital, and with LCD screen.

From experience I always recommend the LCD screen. with it you can configure the heating, purgarla, see errors, adjust power, and countless things, What you can't do with the roulette controller.

⇒ New command 2020

This new remote has the functions that the others, and incorporates a new novelty, and the screen turns off when you don't touch it. Something very appreciated by many people, which does nothing but ask me how to turn off the screen.

Now on SALE with Black Friday, only €103 with the discount coupon code: friday10

lcd switch heating control lcd screen diesel parking heater static stationary heating chinaAnd this model allows it as standard without having to make inventions., nor print custom covers with a 3D printer.

⇒ Analog Control

Chinese static heating thermostat roulette analog control knob

Analog control knob

It is the most basic version which I do not recommend, does not allow you to adjust the parameters to set the height settings, so it will surely fail from 1700/2000 metros.

I have received many messages saying that they chose this model because it is less likely to break down., Don't make that mistake and buy the LCD version.

⇒ Digital Control

Chinese static heating LCD digital control knob

Chinese static heating digital control

This is an improved version, to analog, allows more adjustments, but it's not intuitive.


⇒ Black LCD control

Chinese static heating LCD control knob webasto eberspacher airtronic

Chinese static heating LCD control knob

This version, For me it is the best option of all, it allows you to do the following:

  • Heating control by power
  • Heating control via temperature (thermostat mode)
  • View heating faults
  • See room temperature
  • View battery voltage
  • See heating faults
  • Fuel pump speed setting
  • Setting the maximum and minimum fan speed
  • Schedule on and off time
  • Set shutdown time
  • Remote start with remote control

This version has 2 power on timers and 2 off, works like a cell phone alarm, It is very easy to program.

Allows you to use this remote control (ONLY THIS).

simple remote control 2 china stationary heating buttons

⇒ Blue LCD Control, red and gold

parking heater lcd futuristic blue control thermostat static stationary heating china

This type of LCD is an improved version, It is available in various colors, and you can change the layout of the buttons.

It's prettier in my point of view., has some improvements, but also drawbacks compared to its black version.

It incorporates a height sensor, so you can see on the screen the height at which you are, This does not mean that you change the heating settings to adjust to the height you are at., because I have been able to verify that this is not the case.

The ignition programming system is very different, in this version it is a timer, For example, you can tell it to turn on 5 hours, and turn it off 8. And you can only program one on and one off., and not two like in the black version.

This screen works with a new remote control, It is much more complete, you can change the operating mode and temperature, showing it on the screen at all times.

red switch heater red remote control stationary heating china remote control controller red remote 100m chinesse parking heater diesel

red knob stationary heating china

 

 

⇒ 12v and 24v version

The LCD models allow you to easily change the spark plug and the engine from 24v to 12v or vice versa..

Unfortunately, as the screen is a universal accessory for both voltages, we can find that when connecting it, It is configured at 24v and when using it at 12v we give the error E-01 What does low voltage mean?, and go crazy thinking that the battery is in bad condition.

Heating models without LCD display cannot be adjusted to change the voltage., so the screen would also have to be changed. If this is your case, in our section spare parts and accessories you can find it.

 

⇒ Need height kit like webasto, eberspacher o planar?

If you have or have had a webasto stationary heater, eberspacher o planar, you will know that these require a HEIGHT Kit to be able to operate at heights higher than 1700 at 2000m and up, because they cause smoke problems and end up going out.

These height kits are expensive, They can cost between 150 and €200 depending on the brand, and without counting the labor.

With Chinese stationary heaters, It is problem this resolved, it is easy to adjust them, being totally free its adaptation, It will only require a small adjustment to be able to function at any height, here do you have the manual for it, yes indeed, you must have the LCD screen.

⇒ Models with analogue control operate at height?

And, but sooner or later they will end up failing like the webasto ones. Over time (hours) will create carbon, and it will clog causing it to stop working. So we recommend you put an LCD screen.


If due to ignorance you bought the heating without this type of control, you can replace it without problems. You have it available in our section accessories and spare parts.

⇒ The most feared, the spare parts

Surely you have read in forums and Internet groups that since they are Chinese they do not have any type of technical support nor will you be able to find accessories or spare parts to be able to fix it when it breaks..

This is totally false, You have them everywhere and they are very cheap.. As we have mentioned before, you have them all compiled in our section. spare parts.

⇒ Technical support

From on our website, and our group of facebook We offer totally free technical assistance. You just have to go to the bottom of this same post or any manual and see for yourself..

We DO NOT charge for advising you and helping you with your heating or any other issue., therefore we beg you, Please do not block advertising on our website, With this you help us maintain the server, and to offer you our services totally free.

Little by little the community that we have created on Facebook is growing, myself with nick “ES TEBAN” I try to answer all the questions that are asked., there you can find photos of montages, in different types of vehicles. And all kinds of questions and advice, both mine and the rest of the users, I encourage you to join.

Chinese stationary heating: troubleshooting and spare parts
Closed group · 1447 members
 

Join the group

 

Hola, I'm Esteban, web and group administrator. Here you will find technical support, montage photos, manuals, heating opinions and offers…

⇒ Bricos Tricks and Errors of Chinese stationary heating

This heating is fully customizable, any failure that may give you, or problem has an easy solution, and if your problem does not appear in any of our tutorials, Write to us and we will study it to give you the solution.

⇒ It is easy to assemble?

years ago, They sold Webasto and Eberspacher with very extensive manuals, cables without connectors that you had to crimp, you could make mistakes, bad connections etc, and by then its assembly was quite complicated.


With the arrival of the chinese heaters this has been resolved, They come with their respective connectors perfectly crimped, cables taped to the ends, and long to facilitate assembly without problems.

They come ready to plug and play, The truth is that I was surprised when I opened the box., came a bunch of cables, con 3 connectors, one for heating, one for the fuel pump, and another for the control knob (thermostat) and then two loose cables, one black for negative and one red for positive.

Electrical installation couldn't be simpler, just try not to lengthen the power cord, and if you have to do it, cut it and use one with a larger section so that it doesn't cause problems..

The assembly part itself, All you have to do is make some holes with a hole saw to remove the intake and exhaust pipes., and connect the connection to the auxiliary tank included in the kit, or modify the original installation of the vehicle or put espadin. The latter is already more complicated., I recommend using the included deposit or, failing that, sprat, although it is more complicated than putting a T.

⇒ Quality control

Despite what you may have read on social media, that they are very bad, They fail more than a fair shotgun, they put smoke inside the vehicle, I can tell you that it is TOTALLY FALSE.

With the arrival of these heaters, many sellers have seen their sales reduced considerably, which I understand perfectly. That's why they criticize them and spread false rumors to scare people and give them a bad name..

Proof of it, is that the webasto and eberspacher accessories are exactly the same as those for Chinese heaters, and the users of our Facebook group with more than 1300 users can confirm it.

As with everything, some unit may arrive damaged, or with a defective part. But talking to the seller, without any problem he will resend you the defective part, or return part of the money you paid to buy it yourself.

⇒ You have questions about assembly or operation?

Enter our frequently asked questions section, where we will solve all your doubts by clicking Here.

⇒ Manual LCD display Chinese stationary heating / NOVELTY

Credit Here to access the manual.

 

PROS:
  • Very economical price
  • Easy installation
  • Normally without customs
  • 2 years warranty (and Amazon) 6 months (on ebay or aliexpress)
  • With internal overtemperature sensors
  • Combustion failure detector
  • Replacement parts available at very low prices

CONS:
  • Difficulty in homologating them, due to lack of documentation.

my personal opinion

After trying it, see how it works, heating power, low cost accessories and spare parts, very extensive unofficial technical service from me, and best of all its price, taking into account that a top brand heating such as webasto, eberspacher or planar cost around €900 without a doubt my recommendation is to buy it.

It will give you the same service as any other, but for a quarter of the price. And in case it breaks down, With what you have saved you can buy yourself 3 but.

My recommendation is that you buy the model with a Black LCD screen 2kw, 5kw. Although if you are not going to use the timer you might be more interested in the model with Blue LCD 2kw, 5kw.

If you don't know what power you need, It is very simple if your vehicle is a VW T4 type., t6, vivaro (inferior a L2H2, you need the 2kw version. On the other hand, if your vehicle is type LT35, Sprinter, Crafter, Movano (L2H2 or higher) you need the 5kw version.

 

 

  1. The heating has already arrived but without the remote control, I have complained to the seller and he tells me that he does not understand him and that I should send him a photo of the contents of the box. Meanwhile, the photos and description of the item have changed and the remote no longer appears anywhere.. a lot of shit. The seller is smoothbuy1392

    • Thanks for letting me know, I'm going to delete it so it doesn't happen to anyone else.. Make the corresponding claim, I am reviewing the ad and if indeed the control has been removed from the photo! what a c**** ask for a refund of €30/40!!

  2. I have already made a decision, I will buy the one you recommend since the shipping costs of the other cheap one make it even more expensive. Many thanks for everything

    • Hi Rakel., They are practically all the same, What can help you decide are the ratings and comments of the sellers, In the end, which one are you going to buy?, the one with the black LCD, or the one with the blue LCD?
      Greetings

  3. I thank you very much for all the information.
    I recently bought one of these systems to install on my boat.. water systems, electricity, etc. They are very similar to those of the camper and this is one of them.
    Thanks to your explanations I have managed to make it work, because the system comes very complete, with connectors and screws, but the LCD remote control lacks an instruction manual and is not very intuitive.
    Is it possible to download the LCD programming manual from some link?, I see that it can control many parameters and I would like to adjust some.
    Thank you very much again for this magnificent page.

  4. Hello, the heating has a thermostat so I put it on. 15 degrees and 20 minutes I have it in 24 and I have to turn it off because it keeps going up
    Gracias

    • Hello Jorge, has 2 operating modes by power that shows you HZ on the screen, or in thermostat mode that comes out in degrees, To switch between modes press the settings key + up arrow.
      It is possible that you have chosen a more powerful model than you need., and that's why you have that problem, thermostat mode does not turn off the heating, but it puts it to a minimum.
      If you continue IT IS manual will teach you how to lower the power to solve it. If you have any questions, write to me.
      Greetings.

  5. Hi there
    I have a 5kw heater installed in my ac
    The doubt I have is the following:
    The lacefaction may be working when the battery is charging through the alternator?
    That is, with the vehicle started….
    Greetings and thank you

    • Hello Sergio, and, there is no problem having the heating on, either with the battery charger or with the vehicle driving.
      Greetings.

  6. Ok
    Gracias
    All the best

  7. Hola, I am going to replace an eberpacher in cali t4 with a china one. the entire kit must be replaced, or only the box would arrive?. Would there be some way for the Westfalia switchboard to recognize it??. Gracias, you're very kind

  8. I mean the central unit, the heating itself, let's go. I have also seen that there is another option with a second generation remote control…have you seen it?

    • Hola, You can replace your old Eberspacher with this Chinese one without problem, You could even reuse some components such as the existing diesel pump, the diesel circuit that you already use in the eberspacher and intake and exhaust pipes, as well as the silencer.
      I assume you mean this model It is a very good option, Also the one from eBay arrives in 48/72 hours..
      Unfortunately there is no way to make the westfalia switchboard recognize the heating.
      Greetings.

  9. Hola, It's not an answer but a question. My Chinese heater started to fail in Morocco, because of altitude sickness I think, it was emitting white smoke, I took it apart and it was full of carbon, cleaned and reassembled now it works but at 6 minutes it turns off and the temperature LEDs do not light up, the voltage leaves 12 but it starts to go down 11.2 I start the engine and it goes up 13, but it turns off anyway, What could that be?????…. Thanks in advance.

    • Hola, 11,2v is very very little, If it drops to that level when you turn on the spark plug, it is a sign that your battery is either very discharged or practically dead..
      The smoke can be due to both altitude sickness, like because of the battery, and not being able to turn on correctly, regardless of whether you start the engine, turning it on does not guarantee that it works.
      Make a good load, and try again, If it continues to drop to that level, consider changing the battery..
      To resolve the soot issue, you have to improve the mix, introduce more air and less diesel, Therefore you should use the configuration that I indicate. here.
      Greetings.

  10. Cesar Mariñosa Iglesias 30 January, 2019 at 18:50

    Hi there. I bought the week, the Air heater stationary heating arrived last week 2.0 5.0 and when mounting it it gives me the error 6. I have tried all the solutions that come out in the bricos and it still doesn't work..
    We have come to the conclusion that the motor does not turn.
    What solution can you give me?? Greetings, thank you

    • Hola, When you turn the fan by hand it is hard? should spin smoothly. It goes hard, Separates the heating body from its plastic casing, you will need to gently pull the fan blades outward 1 o 2 millimeters, It has probably taken a hit during transport and has moved from its place.. If you spend too much time stretching, when mounting the casing, the propeller will rub against this.
      If, on the other hand, it rotates smoothly, The problem may be in poor wiring contact., Check that the connector is properly placed on the motherboard., try removing it and putting it back.
      Greetings.

1 2 3 4 5 6 … 9
Ycomosehace
Logo