Stationary heating
There is very little information about this type of heating, which are gradually becoming popular due to their low price. To this day it has almost been 3 I have had this Chinese heating installed in my home for years to heat the dining room with an average of about 10/12 hours a day.
During all this time, I have messed around, disassembled, I have tried, I have investigated and little by little I have been making manuals and DIYs that you can consult in the menu at the top.
But all this doesn't end here, I'm working on several more bricos, one for heat the water in the tank of the vehicle, and another to be able to control the heater via Wi-Fi or Bluetooth with mobile devices and smartphones..
I hope that with all the information that I am putting on the website it helps you decide to buy this low-cost heating that has nothing to envy of the original ones like webasto, eberspacher o planar.
Here you have some photos so you can see it in detail., comment that they are ALL exactly the same, There is no one that works better than another, they just change the number of accessories they come with., the type of screen and the color of the case.
⇒ Available models and technical characteristics
| Models | 2Q/Q3 | 5Q/Q8 |
|---|---|---|
| Measurements | 310x115x122 | 376x140x150 |
| Maximum power | 2000w | 5000w |
| Electrical consumption | 7w a 37w | 7w a 45w |
| Diesel consumption | 0.10 a 0.36l/h | 0.10 a 0.73l/h |
exist 4 versions, of which 2kw, 3kw have the same size so through configuration you can give it more or less power according to your needs. The same happens with the 5kw versions., and 8kw are the same with two different names.
Don't be fooled into thinking that one will be more powerful than the other because that is not the case..
Comment also, It is common practice to send the 5kw model and sell it to you as a 2kw one., You have to look very carefully at the technical data sheet or else you will find yourself in the situation where you will have too powerful heating in your vehicle., and believe me, you will be hot (although there is a solution) as you can see in the manuals.
⇒ Chinese stationary heating measurements 2kw vs 5kw
⇒ What does the installation KIT include??
Depending on the seller we buy it from, May include more or fewer accessories for installation, some sellers may not include the exhaust muffler (chrome), and only the admission (black piece), but that is not a problem since it can be purchased separately here, and not mounting it will not influence its operation.
This is a list of what is “usually” include.
- aluminum intake pipe
- INOX exhaust pipe
- Muffler or intake filter (hay 2 versions)
- exhaust muffler
- Screws
- Clamps of various sizes
- rubber tube / rubber to connect the heater unions to the pump
- Nylon tube that goes from the diesel tank to the pump
- diesel filter
- Wiring with its crimped connectors, ready to connect
- Control command, Analog or roulette, digital, o LCD (there are several versions)
- Plate / metal mounting bracket
- Auxiliary diesel tank 5 o 10 liters according to the seller
⇒ Types of command / screen
There are countless control models, There are analog or roulette ones like a thermostat, digital, and with LCD screen.
From experience I always recommend the LCD screen. with it you can configure the heating, purgarla, see errors, adjust power, and countless things, What you can't do with the roulette controller.
⇒ New command 2020
This new remote has the functions that the others, and incorporates a new novelty, and the screen turns off when you don't touch it. Something very appreciated by many people, which does nothing but ask me how to turn off the screen.
Now on SALE with Black Friday, only €103 with the discount coupon code: friday10
And this model allows it as standard without having to make inventions., nor print custom covers with a 3D printer.
⇒ Analog Control
It is the most basic version which I do not recommend, does not allow you to adjust the parameters to set the height settings, so it will surely fail from 1700/2000 metros.
I have received many messages saying that they chose this model because it is less likely to break down., Don't make that mistake and buy the LCD version.
⇒ Digital Control
This is an improved version, to analog, allows more adjustments, but it's not intuitive.
⇒ Black LCD control
This version, For me it is the best option of all, it allows you to do the following:
- Heating control by power
- Heating control via temperature (thermostat mode)
- View heating faults
- See room temperature
- View battery voltage
- See heating faults
- Fuel pump speed setting
- Setting the maximum and minimum fan speed
- Schedule on and off time
- Set shutdown time
- Remote start with remote control
This version has 2 power on timers and 2 off, works like a cell phone alarm, It is very easy to program.
Allows you to use this remote control (ONLY THIS).
⇒ Blue LCD Control, red and gold

This type of LCD is an improved version, It is available in various colors, and you can change the layout of the buttons.
It's prettier in my point of view., has some improvements, but also drawbacks compared to its black version.
It incorporates a height sensor, so you can see on the screen the height at which you are, This does not mean that you change the heating settings to adjust to the height you are at., because I have been able to verify that this is not the case.
The ignition programming system is very different, in this version it is a timer, For example, you can tell it to turn on 5 hours, and turn it off 8. And you can only program one on and one off., and not two like in the black version.
This screen works with a new remote control, It is much more complete, you can change the operating mode and temperature, showing it on the screen at all times.
⇒ 12v and 24v version
The LCD models allow you to easily change the spark plug and the engine from 24v to 12v or vice versa..
Unfortunately, as the screen is a universal accessory for both voltages, we can find that when connecting it, It is configured at 24v and when using it at 12v we give the error E-01 What does low voltage mean?, and go crazy thinking that the battery is in bad condition.
Heating models without LCD display cannot be adjusted to change the voltage., so the screen would also have to be changed. If this is your case, in our section spare parts and accessories you can find it.
⇒ Need height kit like webasto, eberspacher o planar?
If you have or have had a webasto stationary heater, eberspacher o planar, you will know that these require a HEIGHT Kit to be able to operate at heights higher than 1700 at 2000m and up, because they cause smoke problems and end up going out.
These height kits are expensive, They can cost between 150 and €200 depending on the brand, and without counting the labor.
With Chinese stationary heaters, It is problem this resolved, it is easy to adjust them, being totally free its adaptation, It will only require a small adjustment to be able to function at any height, here do you have the manual for it, yes indeed, you must have the LCD screen.
⇒ Models with analogue control operate at height?
And, but sooner or later they will end up failing like the webasto ones. Over time (hours) will create carbon, and it will clog causing it to stop working. So we recommend you put an LCD screen.
If due to ignorance you bought the heating without this type of control, you can replace it without problems. You have it available in our section accessories and spare parts.
⇒ The most feared, the spare parts
Surely you have read in forums and Internet groups that since they are Chinese they do not have any type of technical support nor will you be able to find accessories or spare parts to be able to fix it when it breaks..
This is totally false, You have them everywhere and they are very cheap.. As we have mentioned before, you have them all compiled in our section. spare parts.
⇒ Technical support
From on our website, and our group of facebook We offer totally free technical assistance. You just have to go to the bottom of this same post or any manual and see for yourself..
We DO NOT charge for advising you and helping you with your heating or any other issue., therefore we beg you, Please do not block advertising on our website, With this you help us maintain the server, and to offer you our services totally free.
Little by little the community that we have created on Facebook is growing, myself with nick “ES TEBAN” I try to answer all the questions that are asked., there you can find photos of montages, in different types of vehicles. And all kinds of questions and advice, both mine and the rest of the users, I encourage you to join.
|
|||||||
⇒ Bricos Tricks and Errors of Chinese stationary heating
This heating is fully customizable, any failure that may give you, or problem has an easy solution, and if your problem does not appear in any of our tutorials, Write to us and we will study it to give you the solution.
- Manual, height kit activation and configuration
- Error and troubleshooting manual for Chinese stationary heating
- Manual to lower the power.
- FAQ with frequently asked questions
- LCD Screen Manual
⇒ It is easy to assemble?
years ago, They sold Webasto and Eberspacher with very extensive manuals, cables without connectors that you had to crimp, you could make mistakes, bad connections etc, and by then its assembly was quite complicated.
With the arrival of the chinese heaters this has been resolved, They come with their respective connectors perfectly crimped, cables taped to the ends, and long to facilitate assembly without problems.
They come ready to plug and play, The truth is that I was surprised when I opened the box., came a bunch of cables, con 3 connectors, one for heating, one for the fuel pump, and another for the control knob (thermostat) and then two loose cables, one black for negative and one red for positive.
Electrical installation couldn't be simpler, just try not to lengthen the power cord, and if you have to do it, cut it and use one with a larger section so that it doesn't cause problems..
The assembly part itself, All you have to do is make some holes with a hole saw to remove the intake and exhaust pipes., and connect the connection to the auxiliary tank included in the kit, or modify the original installation of the vehicle or put espadin. The latter is already more complicated., I recommend using the included deposit or, failing that, sprat, although it is more complicated than putting a T.
⇒ Quality control
Despite what you may have read on social media, that they are very bad, They fail more than a fair shotgun, they put smoke inside the vehicle, I can tell you that it is TOTALLY FALSE.
With the arrival of these heaters, many sellers have seen their sales reduced considerably, which I understand perfectly. That's why they criticize them and spread false rumors to scare people and give them a bad name..
Proof of it, is that the webasto and eberspacher accessories are exactly the same as those for Chinese heaters, and the users of our Facebook group with more than 1300 users can confirm it.
As with everything, some unit may arrive damaged, or with a defective part. But talking to the seller, without any problem he will resend you the defective part, or return part of the money you paid to buy it yourself.
⇒ You have questions about assembly or operation?
Enter our frequently asked questions section, where we will solve all your doubts by clicking Here.
⇒ Manual LCD display Chinese stationary heating / NOVELTY
Credit Here to access the manual.
- Very economical price
- Easy installation
- Normally without customs
- 2 years warranty (and Amazon) 6 months (on ebay or aliexpress)
- With internal overtemperature sensors
- Combustion failure detector
- Replacement parts available at very low prices
- Difficulty in homologating them, due to lack of documentation.
After trying it, see how it works, heating power, low cost accessories and spare parts, very extensive unofficial technical service from me, and best of all its price, taking into account that a top brand heating such as webasto, eberspacher or planar cost around €900 without a doubt my recommendation is to buy it.
It will give you the same service as any other, but for a quarter of the price. And in case it breaks down, With what you have saved you can buy yourself 3 but.
My recommendation is that you buy the model with a Black LCD screen 2kw, 5kw. Although if you are not going to use the timer you might be more interested in the model with Blue LCD 2kw, 5kw.
If you don't know what power you need, It is very simple if your vehicle is a VW T4 type., t6, vivaro (inferior a L2H2, you need the 2kw version. On the other hand, if your vehicle is type LT35, Sprinter, Crafter, Movano (L2H2 or higher) you need the 5kw version.








El cable esta bien , el sensor no lo puedo probar con el de mi hermano ,pero diría que bien, tiene que ser centralita, pediré una y ya os contaré ??
Hola otra vez!!!! He puesto la centralita nueva (es un poco diferente) but, ahora me marca E-06 ? what can it be? Que la centralita es otro modelo?
Hi David.
Llega a girar el motor en algún momento? si no gira es porque has conectado mal el motor.
Si gira es que el sensor hall no te esta detectando el motor posiblemente al abrir la tapa negra el sensor a quedado fuera del hueco que tiene para el.
Revisalo a ver si conseguimos resolverlo.
Bueno ,he probado todas las combinaciones y no hay manera, tiene que ser la placa que es diferente , ?
Mandame una foto de la que te ha llegado y otra de la original, aqui o en el grupo de facebook para que pueda verla a ver si averiguo donde esta el problema
Hello good !! Como te la envío la foto? y en el Facebook,como os busco? Perdona mi torpeza ?
Cuelgala here en el grupo de facebook.
De ese modo si encontramos la solucion y le pasa a alguien mas podra encontrar como resolverlo.
Una pregunta de cara al vetano, se puede usar sin que de calor? Osea solo el ventilado? Estaría bien para crear corriente de aire dentro del vehículo ?
No, no tiene modo ventilacion. Yo me vi en tu misma situación, y la solución que encontré fue comprarme this, lo tengo puesto encima de la cama y va muy bien tiene 3 velocidades y gasta muy poco, puedes usar un cargador usb de movil tanto de 12v como a 220v, o incluso una powerbank a 5v.
Esta muy bien , pero me gustaría coger el aire de la calle , mi curiosidad es que , igual que se puede bajar la potencia a travez de los códigos , para que de menos calor , ¿ no se podría configurar los códigos de manera que no se encendiera? Y así cogería el aire de la calle , mil gracias
No se puede no, digamos que la pantalla solo manda la orden de encendido, puedes modificar ciertas cosas, pero no el funcionamiento interno como es solo encender el ventilador.
Este ultimo comentario.. no cogerás el aire que calienta la calefacción del exterior? es un error muy grave.. en ciertas condiciones, como puede ser a altura, sueltan mas humo de lo normal, y haciendo eso lo unico que consigues es meterlo en el interior, deberías recircular el aire interno para que eso no ocurra, a parte de que seria mas eficiente.
Lo que mejor te iría es una claraboya con ventilador, y si tienes ya un agujero de la calefacción (que quedaria libre si resuelves lo que te comentaba) ya tienes parte del trabajo listo.
Thank you so much, ??
Hello good,el mando a distancia hay que configurarlo?el mio no funciona.gracias!!
Hola Oliver, que pantalla tienes? negra o azul? y que mando es? tipo garaje o el rojo?
Te dejo la url del manual donde explico como configurar-lo entre otras cosas.
Greetings.
Hola, mi nombre es Martin soy de Argentina.
MUCHAS GRACIAS por toda la información suministrada en las respuestas, encontré tu sitio buscando algún clon chino para la DUAL TOP y luego de ver tu descripción me atraparon todos los comentarios.
Respecto a la que indicas al principio como DUAL, por lo que pude ver en las publicaciones dice que es para precalentar el circuito del motor, sabes si se puede utilizar como para agua caliente sanitaria (bañarse y lavar los platos)?
Sabes si hay otro modelo que cumpla dicha función?
Nuevamente gracias!
Hola Martin, a parte de la Dual, existen los hydronic y webasto thermo top que son precalentadores de motor, yo en mi vehiculo utilizo uno de estos para calentar el deposito de 90L que tengo instalado en mi furgoneta. With the dual tambien se puede hacerlo mismo, y en vez de 2 aparatos seria solo 1.
Quizás te interese este brico y pueda darte mas ideas para calentar el agua.
Existe una tercera opción, es la copia china de la Dual Top en GLP o Diesel, aquí te dejo el enlace: http://s.click.aliexpress.com/e/LMZefIcu
El precio es algo elevado en comparación con las otras opciones, pero es lo mas parecido a lo que tu buscabas.
Greetings.
Hola. Tengo una vw caravelle t6. Supongo que necesito la de 2kw pero para que esté todo bien que más necesito?
Es decir silenciador…
Cosas que no incluya y que se puedan adquirir aparte.
Gracias
Hola Lorena, si donde la montas, no queda en un sitio plano, necesitaras el sellador para tapar bien el agujero y no te entre humo al interior https://ycomosehace.es/recambios-y-accesorios/sellador/
El resto de accesorios, como el silenciador van incluidos.