Como ajustar el release smart adjustable isolar vsr 12v 140a
Adjusting it is very simple, For lifepo4 batteries, press the OK button for a few 5-7 seconds.
They appear to us 4 points to be able to adjust parameters.
- Manual or automatic adjustment, We place ourselves with the arrows at the number point 1 and click ok, We can alternate between car and manual.
- Set Voltage: Here we must put 1: On_v: 13.9, in it 2, Off_v: 13.5v
- En set delay: on: 20s and off delay: 5s (This parameter can be adjusted at will, We put 20s to give a little margin to the engine to lubricate well before giving cane to the alternator)
- ESC is to get out of the menu.
When using manual mode, And when using the Auto mode in the VSR
In the mode AUTO The reverse will pay attention to the configuration we just put up, It will be on and off only in the function of the parameters that we have put.
In mode MANUAL We can activate or deactivate the relief of our will manually by pressing the arrow up or down arrow.
The connection screws are M6 and for it to work correctly the connections must be connected. 2 batteries, both primary and secondary, In the correct order, but will not work properly.
