How to change antifreeze in a vehicle

Antifreeze is a very important fluid in our car's engine.. He is in charge of reduce engine temperature and keep it at its optimal operating temperature.
Normally, The cooling circuit is made up of several elements. The elements that are part of the operation of the cooling system are the expansion bottle, a radiator, a thermostat, a water pump, an electric fan and the hoses that contain the antifreeze itself.
Antifreeze must be replaced periodically so that the engine cools in good condition.. in the circuit We can only add new coolant and never water. The water causes the circuit to rust and, besides, It does not have the antifreeze power that coolant does..
First step
We must open the expansion bottle cap. We must open this cap carefully since, yes the car is hot, we can run the risk of burn ourselves with the antifreeze that will be expelled. It is advisable to wait for the car to cool before removing the expansion bottle cap..

The next step will be to remove the antifreeze drain plug.. This plug is normally located at the bottom of the radiator or some hose.. If you don't find it, we can directly remove the cuff which is connected to the bottom of the radiator. With this method we must be careful since we will surely dirty everything around us., us included.
Second step
Once the circuit is completely emptied, We will proceed to put the radiator hose back on or close the drain plug. We will make sure that the cap or sleeve is closed and properly fitted.. Otherwise, we could lose all the new antifreeze and seriously damage the engine. Old antifreeze must be taken to a Clean Point for correct treatment..
We will proceed to fill the antifreeze through the expansion bottle, leaving the level at the maximum. But before leaving everything ready, it is necessary to bleed the circuit to remove any air pockets that may be present.
Last price update on 2026-11-18 at 08:37 Fuente: Amazon Affiliates
